Please read store policy before placing your order!
AquaCal ECS0275 / STK0127 Temperature Sensor, Right Angle
AquaCal ECS0275 / STK0127 Water Temperature Sensor replacement Kit
*** PART # STK0127 is being replaced by PART # ECS0275
- Use 11/32" or 3/8" drill bit to tap into water inlet line.
- Snug the hose clamp around the sensor.
- CAUTION: Over tightening the hose clamp will break the sensor.
ECS 0275 ECP0275 ECP
For any older AquaCal Heat pump with a sensor well the 6015D is the correct part.
Whenever there is a question as to the type of sensor the STK0127 kit will allow you to repair any of the three sensor types they might encounter.
If there is a well they can use the 6105D from the kit
If you find an ECP0237 you use the well and the 6105D from the kit.
If you find an ECP0137 you will have to cut and glue a little PVC (but it’s easy) and use the entire kit.
*** PART # STK0127 is being replaced by PART # ECS0275
- Use 11/32" or 3/8" drill bit to tap into water inlet line.
- Snug the hose clamp around the sensor.
- CAUTION: Over tightening the hose clamp will break the sensor.
ECS 0275 ECP0275 ECP
For any older AquaCal Heat pump with a sensor well the 6015D is the correct part.
Whenever there is a question as to the type of sensor the STK0127 kit will allow you to repair any of the three sensor types they might encounter.
If there is a well they can use the 6105D from the kit
If you find an ECP0237 you use the well and the 6105D from the kit.
If you find an ECP0137 you will have to cut and glue a little PVC (but it’s easy) and use the entire kit.
www.allwatermeters.com is an eSeasonGear Dropship Store - One Manufacturer per Order please!